[fltsim.0]
title=Boeing 737-400
sim=Boeing737-400
...
[airplane_geometry]
wing_area = 1137.0 //Square feet
wing_span = 94.75 //Feet
wing_root_chord = 18.0 //Feet
wing_dihedral = 6.2 //Degrees
wing_incidence = 1.0 //Degrees
wing_twist = -0.5 //Degrees
oswald_efficiency_factor= 0.75 //Measure of lift effeciency of wing
wing_winglets_flag = 0 //Are winglets available?
wing_sweep = 25.0 //Degrees, wing leading edge
wing_pos_apex_lon = 8.0 //Feet, longitudinal distance from reference point, negative going aft
wing_pos_apex_vert = 0.0 //Feet, vertical distance from reference point, positive going up
htail_area = 338.0 //Square feet
htail_span = 41.7 //Feet
htail_pos_lon = -35.0 //Feet, longitudinal distance from reference point, negative going aft
htail_pos_vert = 0.0 //Feet, vertical distance from reference point, positive going up
htail_incidence = 0.0 //Degrees
htail_sweep = 30.0 //Degrees, horizontal tail leading edge
vtail_area = 224.0 //Square feet
vtail_span = 20.0 //Feet, tip to body
vtail_sweep = 35.0 //Degrees, vertical tail leading edge
vtail_pos_lon = -35.8 //Feet, longitudinal distance from reference point, negative going aft
vtail_pos_vert = 5.8 //Feet, vertical distance from reference point, positive going up
elevator_area = 70.5 //Square feet
aileron_area = 26.9 //Square feet
rudder_area = 56.2 //Square feet
elevator_up_limit = 22.5 //Degrees
elevator_down_limit = 19.5 //Degrees
aileron_up_limit = 20.0 //Degrees
aileron_down_limit = 20.0 //Degrees
rudder_limit = 26.0 //Degrees
elevator_trim_limit = 20.0 //Degrees
spoiler_limit = 60.0 //Degrees
spoilerons_available = 1 //Spoilerons Available?
aileron_to_spoileron_gain = 3 //Aileron to spoileron gain
min_ailerons_for_spoilerons = 10 //Degrees
min_flaps_for_spoilerons = 0 //Minimum flap handle position when spoilerons activate